Dishwasher Repair
Dishwasher repair and diagnosis
Poor cleaning, drainage failures, or leaks under the unit — RidgeCore identifies the actual fault before recommending a repair.
Common Symptoms
What we diagnose
| Symptom | Possible cause |
|---|---|
| Dishes not getting clean | Clogged spray arms, a failed wash-motor/pump, or a water-inlet or heating fault affecting wash temperature. |
| Won't drain | Clogged drain hose or air gap, a failed drain pump, or a check-valve fault. |
| Leaking underneath | Worn door gasket, a cracked hose fitting, or a float-switch fault allowing overfill. |
| Won't start or door won't latch | Door latch/switch fault, control-board fault, or a child-lock engaged unintentionally. |
| Cloudy or spotted glassware | Hard-water mineral buildup, a rinse-aid dispenser fault, or a water-inlet temperature issue. |
| Unusual noise during cycle | Debris in the pump/chopper assembly, or worn wash-arm bearings. |
Leaks get priority
A leaking dishwasher can affect cabinetry and flooring. If you notice water underneath the unit, shut it off and avoid running further cycles until it's inspected.
Built-in installation checks
Some cleaning and drainage complaints trace back to installation — an unlevel unit or incorrect drain-loop height. Diagnosis includes checking installation fundamentals, not just replacing parts.
Dishwasher not cleaning or draining?
Describe the symptom and RidgeCore will schedule a diagnostic visit.